manual

ESTOS CallControlGateway 4.0.0.21648
16
5 Installation of ESTOS CallControlGateway
The software is delivered as Microsoft Installer Packet (msi). This software
requires administrative rights for executing the setup.
 Please read the Notes Concerning the Installation
 Start the Installation
 Accept the license agreement
 Choose an installation directory
 A wizard is started that helps you to enter the initial configuration of the ESTOS
CallControlGateway
o Login
o Server Ports
o Licenses
o User Database
o CallControlGateway
o Location
o Lines
 Start the ESTOS CallControlGateway Administrator
Check the following settings:
o Lines
Enable all lines that you need.
o Phone numbers of the lines
During the installation of the ESTOS CallControlGateway you have to configure the
lines. The location of the lines is very important. The location 'Default', which is
configured during the setup, initially contains all lines. The location settings affect
the formatting of the phone numbers. Especially the company root numbers
required to produce the right format for the Office Communicator. See Phone
Number Format for the ESTOS CallControlGateway.
5.1 Login
Enter the user name and the password for the ESTOS CallControlGateway
administrator here during installation.
You need this user name and password to change the ESTOS
CallControlGateway settings. You must enter this login every time the ESTOS
CallControlGateway administrator program is started.
You can change the password later in the Extras menu
5.2 Server Ports
The connection between the workstation application and the ESTOS
CallControlGateway is realized using TCP/IP. ESTOS CallControlGateway
makes different services available on the server. Every service uses a TCP
port.
Attention: You should only change the settings on this page in the following
exceptional circumstances:
Another server application is using the same TCP port.
When such problems occur it is reported on the event log.
List of default ports: