manual

ESTOS CallControlGateway 4.0.0.21648
14
 Finally enter the following line via the Shell to add the route to the global
routes.
Set-CsStaticRoutingConfiguration -Identity global -Route
@{Add=$x}
o Define Trusted Application.
 First customize the following command line to your data. Afterwards enter
the customized command line via the Shell.
New-CsTrustedApplication -ApplicationId NAME -
TrustedApplicationPoolFqdn FQDN -Port PORT
 NAME: Freely definable name of the application. The name is only
allowed once in the Pool.
 FQDN: Network address of the computer on which the ESTOS
CallControlGateway offers its services.
 PORT: 5071 is the standard port of the ESTOS CallControlGateway.
If you have used a different port in the ESTOS CallControlGateway
configuration, enter this port.
o Add Trusted Application to the Trusted Application Pool.
 First customize the following command line to your data. Afterwards enter
the customized command line via the Shell.
Set-CsTrustedApplicationPool -Identity
TrustedApplicationPool:FQDN -OutboundOnly $True
 FQDN: Network address of the computer on which the ESTOS
CallControlGateway offers its services.
 OutboundOnly $True: Can be set on True, because the ESTOS
CallControlGateway establishes no connection to the Lync Server by
itself.
o Activate settings
 To activate the settings enter the following command in the Shell.
Enable-CsTopology
Please note that changing the settings for static routes may require a restart of
the Lync Server.
4.2 Configure Microsoft Lync Client
The Microsoft Lync Client establishes a connection with the ESTOS
CallControlGateway via the Lync Server. For every Lync Client user the remote
call control has to be configured.
The following information is required for every user
1. Line Server URI of ESTOS CallControlGateway
The Line Server URI of the ESTOS CallControlGateway has to match the configured URI in
the Lync. See also Configure Lync Server 2010.
2. Line URI of the user's telephone
The Line URI of the user's phone has to match the telephone number of a line in the line
configuration. This can be, e.g. tel.:+ 49815136856177 or tel:177.
Activate the telephone integration
To be able to use the remote call-contol, the user has to be configured.
User configuration in the Lync Server 2010 Control Panel