manual

ESTOS CallControlGateway 4.0.0.21648
12
Note that the settings for static routes may not take effect until you restart the
OCS .
3.3 Configure Office Communicator 2007
The Microsoft Office Communicator establishes a connection with the ESTOS
CallControlGateway via the Office Communications Server (OCS). The remote
call-contol has to be configured for every user of the Office Communicator.
The following information is required for every user
1. SIP URI of the ESTOS CallControlGateway
The URI of the ESTOS CallControlGateway must match the configured URI in the OCS. See
also Configure Office Communications Server.
2. TEL URI of the user's telephones
The TEL URI of the user's phone has to match the telephone number of a line in the line
configuration. This can be, e.g., tel:[phone] or tel:177.
Activate the telephone integration
To be able to use the remote call-contol, the user has to be configured.
Configuration of the user in the Active Directory
The user's remote call control can be configured in the Active Directory. If the
ESTOS CallControlGateway has a connection to the Active Directory, a user
authorization can be carried out for one phone.
 Launch Active Directory user and Directory computer.
 Open the user's properties.
 Click on the tab Communications on advanced settings.
 Activate the check box: activate remote call control.
 Enter the SIP URI of the ESTOS CallControlGateway. This can be, e.g.
sip:[e-mail]
 Enter the TEL URI of the phone. This can be, e.g. tel:[phone] or tel:177.
Alternative user configuration on a single workplace
You are also able to configure the user's remote call control directly at the
user's workplace. In this case, the user's authorization has to be deactivated in
the ESTOS CallControlGateway.
 Activate remote call control
To activate the telephone integration in the Office Communicator, a registry-key has to be
set which allows manual editing of the settings. Put the value of the registry-key with the
name 'TelephonyMode' frpm the type REG_DWORD in
'HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Communicator' on the value '2'
(Remote Call Control and PC to PC). If the registry-key doesn't exist yet, one can be
created.
This key can also be set using a group policy.
After a restart of the Office Communicator, open the dialog options in the menu.
 Switch on remote call control
On the tab telephones the phone integration can be activated.
 Configure telephone integration
Choose 'Manual configuration' and click on 'Configure'.
Enter at 'URI for remote call control' the SIP URI of the ESTOS CallControlGateway. This can
be, e.g. sip:[e-mail].
Enter at 'Telephone URI' the TEL URI of the phone. This can be, e.g. tel.:[phone]
or tel:177.
 Log off and log on again
The changed setting takes effect when you log off and then log on again.