Users Manual

21
Barcode Scanner
To test the barcode scanner, select the barcode test, point the scanner at a barcode (or QR code), and
press the SCAN button on the screen or press the physical scan button on the handle of the tablet.
System will quickly scan and display the barcode information on screen.
Press the button again to read the barcode again. The displayed info will refresh and display the new
barcode information.
Please aim the laser at the center of barcode. Do not place the scanner too far from barcode.
Barcode scanner uses laser technology, do not point it toward anyone’s eyes.
Button configuration
Button configuration can program the F1 and F2 buttons on your tablet. Select the button you want
to program, choose the desired function and press the SAVE button to save settings, or you can select
cancel to discard the changes.
If you want to program the buttons to a function not on the list, please contact your supplier for further
instructions.