User`s manual

CHAPTER 6
ANTENNAS
6-7
Model 96 Outdoor Fixed Base Antenna Setup Diagram
With External Linear Amplifier
PHONE
ANTENNA
POWER
12 VDC
RS-232/422/485 INTERFACESETUP SWITCH
192C 00001S/N:
EL ECTRONI C SYSTEMS
TECHNOLOGY
KENNEWICK
,
WA USA
MADE IN U SA
ANTENNA
RECOMMENDATIONS
UHF Male
Connector
ANTENNA FEEDLINE
RECOMMENDATIONS
1. Up to 50 ft. use RG-8
Coax (EST P/N AA235).
2. Over 50 ft. use 1/2”
heliax (EST P/N
AA238).
N Male
Connector
N Male
Connector
TNC Male
Connector
LIGHTNING ARRESTOR
(EST P/N AA163)
12 VDC POWER SUPPLY
RECOMMENDATIONS
EST P/N AA174
Battery Packs
Solar Power
2 Pin Molex
Connector
User’s
Device
RG-8 Coax Cable
EST P/N AA233
RS-232C Setup
Switches
RS-232C, 422, & 485
Interface Connector
NOTES
1. Use coax cable runs as short as practical to
minimize cable losses.
2. Vapor wrap all external antenna coax
connections with vinyl wrap (EST P/N AA241)
and apply Scotchkote Electrical Coating (EST
P/N AA242).
3. Contact EST for recommendations regarding
antenna mounting hardware and installation tips.
4. For panel mounting the ESTeem use
mounting brackets EST P/N AA251.
5. For panel mounting the AA174 power supply
use mounting brackets EST P/N AA252.
6. Ground antenna structure and base.
Directional
Antenna
EST P/N AA201
Omni-Directional
Antenna
EST P/N AA20
RS-232C,422, or 485
INTERFACE CABLE
EST P/N AA06,
AA061, AA07, or
custom depending on
device.
12 VDC POWER SUPPLY
RECOMMENDATIONS
EST P/N AA17 (4)
for PA6-1AB-SSR
EST P/N AA171 (7A)
for PA6-1AC-SSR
UHF Male
Connector
UHF Male
Connector
RG-8 Coax Cable
EST P/N AA235