User`s manual

CHAPTER 6
ANTENNAS
6-6
Model 96 Outdoor Fixed Base Antenna Setup Diagram
PHON E
ANTENNA
POWER
12 V DC
RS-232 /422/485 IN TERFACESETUP SWI TCH
192C 000 01S/N:
ELECT RONIC SYSTEMS
TECH NOLOGY
KENNEWICK, WA USA
MADE IN USA
ANTENNA
RECOMMENDATIONS
UHF Male
Connector
ANTENNA FEEDLINE
RECOMMENDATIONS
1. Up to 50 ft. use RG-8
Coax (EST P/N AA235).
2. Over 50 ft. use 1/2”
heliax (EST P/N
AA238).
N Male
Connector
N Male
Connector
TNC Male
Connector
LIGHTNING ARRESTOR
(EST P/N AA162)
12 VDC POWER SUPPLY
RECOMMENDATIONS
EST P/N AA174
Battery Packs
Solar Power
2 Pin Molex
Connector
User’s
Device
RG-8 Coax
EST P/N AA234
RS-232C
Setup
Switches
RS-232C, 422, & 485
Interface Connector
NOTES
1. Use coax cable runs as short as practical to
minimize cable losses.
2. Vapor wrap all external antenna coax
connections with vinyl wrap (EST P/N AA241)
and apply Scotchkote Electrical Coating (EST
P/N AA242).
3. Contact EST for recommendations regarding
antenna mounting hardware and installation tips.
4. For panel mounting the ESTeem use
mounting brackets EST P/N AA251.
5. For panel mounting the AA174 power supply
use mounting brackets EST P/N AA252.
6. Ground antenna structure and base.
Directional
Antenna
EST P/N AA201
for ranges to
approximately
15 miles line-of-
sight.
Omni-Directional
Antenna
EST P/N AA20 for
ranges to
approximately 10
miles line-of-sight.
RS-232C,422, or 485
INTERFACE CABLE
EST P/N AA06,
AA061, AA07, or
custom depending on
device.