Owners manual

10. If the Printing paper info option is enabled, the front panel may ask you to specify the length of the

roll. See Printing paper info on page 59.

11. Close the roll cover when the front panel prompts you to do so.

NOTE: If you have an unexpected issue at any stage of the paper loading process, see The paper cannot be

loaded successfully on page 145.

Unload a roll

Before unloading a roll, check whether there is paper on the roll or if the roll is out of paper, and follow the

appropriate procedure as described below.

Quick procedure with paper on the roll

If there is paper on the roll, just open the roll cover, and the roll is unloaded automatically. The front panel

prompts you to load a new roll or sheet.

NOTE: When the roll is unloaded in this way, no barcode is printed on it, so the printer will not know the

length of the roll when it is next loaded. See Printing paper info on page 59.

NOTE: If you open the a roll cover while a sheet is loaded, the sheet is also unloaded.

Front panel procedure with paper on the roll

If there is paper on the roll, you can unload it from the front panel.

Press , then if it is not already highlighted, then the roll icon, then Unload.

Alternatively, press , then , then Paper > Paper unload > Unload roll 1 or Unload roll 2.

52 Chapter 6 Paper handling ENWW