Owners manual

In some cases, when the printer is not in the same sub-net as the computer, specifying the printer's IP

address may be the only successful option.

5. Follow the instructions on your screen to install the printer drivers and other HP software, such as the

HP DesignJet Utility.

Uninstall the printer software (Windows)

1. Insert the HP Start-up Kit DVD into your DVD drive. If the DVD does not start automatically, run the

setup.exe program in the root folder of the DVD.

2. Navigate to the Software Installation button and press it.

3. Press the Install Software button, and follow the instructions on your screen to uninstall the printer

software.

Connect a computer to the printer by network (Mac OS X)

You can connect your printer to a network under Mac OS X by using the following methods:

●

Bonjour

●

TCP/IP

TIP: Bonjour is are recommended for your local network; TCP/IP is recommended for other networks.

The following instructions apply if you intend to print from software applications using a printer driver. See

Printing on page 64 for alternative ways of printing.

Before you begin, check your equipment:

●

The printer should be set up and on.

●

The Ethernet switch or router should be on and functioning correctly.

●

The printer and the computer should be connected to the (wired or wireless) network. See Connect the

printer to your network on page 16.

Now you can proceed to install the printer software and connect to your printer.

Go to the front panel and press , then . Note the mDNS service name of your printer.

2. Insert the HP Start-up Kit DVD into your DVD drive.

3. Open the DVD icon on your desktop.

4. Your Web browser opens to display the rest of the software installation procedure. You must click

on .Download OS X Installer. Once downloaded, open the installation software to install all required

components onto your system.

5. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a

connection to your printer. Follow the instructions on your screen.

6. When you reach the Select Printer screen, look for your printer's mDNS service name (which you noted

in step 1) in the Printer Name column.

18 Chapter 2 Installing the software ENWW