Owners manual

●
The borders of colored blocks are wrongly colored.
To correct this kind of problem:
1. Reseat the printhead by removing and then reinserting it. See Remove the printhead on page 128 and
Insert the printhead on page 131.
2. Align the printhead. See Align the printhead on page 176.
Lines are discontinuous
If your lines are broken in the following way:
1. Check that you are using appropriate print-quality settings. See Printing on page 64.
2. Reseat the printhead by removing and then reinserting it. See Remove the printhead on page 128 and
Insert the printhead on page 131.
3. Align the printhead. See Align the printhead on page 176.
Lines are blurred
Humidity can cause ink to soak into the paper, making the lines blurred and fuzzy. Try the following:
162 Chapter 18 Troubleshooting print-quality issues ENWW