User Manual

1. Security alerts
Make it installed before the use of safe
Please modify personal codes and master codes
Don’t put mechanical emergency key in the safe
2. Main feature
Usage: deposit laptop and other valuables
Operation :Micro-motor engine,with code operation
Manage:open&close with 3-6 digit personal codes or (and) 6 digit master codes.
Safety: wrongly input code by 3 times, hold on 15 minutes.
3. Open and close with code
〈1〉close by personal code
Input any 3 ~6 digit code then press the “#” key, “CLOSED” display , the safe is closed.
〈2〉open by personal code
Input your 3~6 digit code then “OPENED” display, the safe is opened.
〈3〉open by master code
Input Master code (factory Master code is ”000000”) , “OPENED” display ,
the safe is opened.
4. Change master code
<1> Modify master code
Make sure that the safe is opened , and the operation is as follows:
Press "*” twice quickly ,show “PROG”, enter the original master password
(factory master code is”000000”), show “NEU” , input 6 new master password,
show “AGAIN”, input the new master password, show ”DONE” ,
the master code is changed.
5. Set the time of safe box
Press "*” twice quickly ,show “PROG”, enter “895100”, show the first 6 digit
information, do not modify, press “#”, when show the second 6 digit information,
means “year, month, day” in turn, enter the local time, press “#”, when show the
third 6 digit information, means “hour, minute, second” in turn, enter the local
time, press “LOCK”, the time set success.
Instruction Manual