Specifications

Vehicle Keypad Locks Section: AKE-5 User Guide

3. Using Codes

There are two types of Codes available in the AKE-5: The Master User Code (1) and Optional User

Codes (5). The Master User Code operates all functions available in the system plus allows you to

add, change, and delete Optional User Codes.

How to enter the Master User Code

A. To Unlock the vehicle simply enter your 3 to 8 digit Master User Code

Note: The Factory Default Master User Code is 1 3 5 7 9. You or your installer should change

this immediately to a personal 3 to 8 digit code. Try using a 7 digit phone number for your new

Master User Code.

Note: The keypad on the AKE-5 has 5 keys. Each key represents two digits. The first key can

be used as either or both the numeral 1 and the numeral 2 when you are entering a code.

Example: The Factory default Master User Code can be described as 1 3 5 7 9 or as 2 4 6 8 0.

To the system they are the same 5 digit code. If you want a 1 or a 2 in your Master User Code

or in an Optional User Code use the first key to represent both numbers.

How to change the Master User Code

A. Locate and press the System Programming Switch

4 Rapid Beeps will sound and you will have 2 minutes to start

programming the system.

B. Enter 1 1 1 9 on the keypad

3 Rapid Beeps will sound

C. Within 5 seconds of the 3 Rapid Beeps start entering your new 3 to 8 digit Master User Code.

Now wait 5 seconds and listen for 3 Rapid Beeps. You’re done! Try the new Master User Code

and the door will unlock. If it doesn't, please read the following paragraph to see if you made an

error or skipped a step while programming.

Note: When using or programming your system you must make each keystroke within 5 seconds

of the previous keystroke or the system will timeout and reset to normal operation. 2 Rapid

Beeps signal system reset. If the system resets before you have completed changing the Master

User Code, you must start over by pressing the System Programming Switch. 1 Long Beep

signals an error has been made during the programming sequence. Don't worry. Start over by

pressing the System Programming Switch.

Code Padding

If you feel you are being observed when you enter your code on the keypad you can "pad" your

code by entering several random digits before you enter your actual code and still have the door

unlock. For instance, if your code is 1 3 9 1 you can enter 5 7 1 3 9 1 and the door will unlock.

What code combinations are restricted

Codes 559, 557, and 555 are pre-assigned as Lock Codes. There is no harm if everybody

knows the Lock Code. However, you can't change a Lock Code so you can't use 559, 557, or

555 as the Master User Code or as an Optional User Code.

Furthermore, you may not program a new Master User Code or Optional User Code that starts

with the digits 5 or 6 (Key 5/6). If you want a 5 or 6 at the beginning of your code start with 05 or

06. Example: 05 05 68 (a birth date).

The Keyless Locks Store For current prices, please visit our website. www. KeylessLocksStore.com

46 Danada Sq West #4133 Phone: (630) 909-9504

Wheaton, IL 60189 Page 9 of 27 FAX: (630) 447-3635

orders@KeylessLocksStore.com Path: Z:\KEY\suppliers\Lockey\website-KEL-zc\_dev\pdfs Modified 05/1 2