Service manual

V Series Service Manual 1–7
1
GETTING STARTED
INTRODUCTION
The V Series Service Manual contains essential
information to help you maintain your 8KV, 9KV,
30HV stand-alone locks, and the XV Controller.
CERTIFICATIONS AND STANDARDS
HV and KV
Locks
■ The strike fits the standard door frame cutout as
specified in ANSI A115.1.
■ The faceplate dimensions fit the standard door
preparation as specified in ANSI A115.1.
■ The locks comply with the following:
▲ FCC CFR 47 Part 15, Subpart C for Intentional
Radiators
▲ CES–003 Canadian EMI Requirements
▲ IEC 61000–4–2 (1995) ESD Immunity
▲ IEC 61000–4–3 (1995) RD Immunity
▲ IEC 61000–4–4 (1995) EFT Immunity
▲ International Safe Transit Association–
Procedure 1A
▲ Humidity Test RTCA/DO–160C–Extended
Humidity.