Service manual

Security Device Maintenance
2–34 V Series Service Manual
KV reader
conversion
If you want to convert the reader of an existing KV Lock, use the
following table to determine the parts that you need. This table includes
only the parts that are different.
For example, to convert an 8KV Lock with a magnetic stripe card
reader to a 8KV Lock with a Motorola proximity reader, you would
remove the following parts:
■ 8KV outside escutcheon (C61405)
■ Card reader (B61646)
■ Outside wire harness (A61643).
You would add the following parts:
■ 8KV outside escutcheon (C60448)
■ Motorola proximity bezel with reader assembly (C60337)
■ Outside wire harness (B60305)
■ Reader gasket (B60321)
■ Retaining ring (A60318)
■ Sealing lens cover (A60317)
■ Reader mounting screws (A60348)
■ Adhesive tape for sounder (A60324)
■ Motorola proximity wake up electronics assembly (B60338)
■ Escutcheon gasket (A60316).
Proximity
Part Type Part No. Description Mag.
a
Kpd.
b
HID
c
Mot.
d
Outside escutcheon C61405 8KV outside escutcheon !
C60448 8KV outside escutcheon ! ! !
C61403 9KV outside escutcheon !
C60449 9KV outside escutcheon ! ! !
Reader B61646 Card reader !
C60325 Keypad assembly with cable and connector !
C60342 HID proximity bezel with antennae &
IR assembly
!
C60337 Motorola proximity bezel with reader assembly !
Outside wire harness A61643 Outside wire harness !
B60305 Outside wire harness !! !
Programmed PROM B62099 Programmed PROM (VP_S15) ! ! !
B62076 Programmed PROM for keypad (VP15KP) !
Reader gasket B60321 Reader gasket !! !
Retaining ring A60318 Retaining ring ! ! !
Sealing lens cover A60317 Sealing lens cover !! !
Reader mounting screws A60348 Reader mounting screws ! ! !
Adhesive tape for
sounder
A60324 Adhesive tape for sounder !! !