Service manual

Security Device Maintenance
2–32 V Series Service Manual
READER CONVERSION
HV reader
conversion
If you want to convert the reader of an existing HV Lock, use the
following table to determine the parts that you need. This table includes
only the parts that are different.
For example, to convert a 34HV Lock with key and magnetic stripe card
reader to a 34HV Lock with key and keypad reader, you would remove
the following parts:
■ 34HV outside escutcheon with key (C61420)
■ Card reader (B61646)
■ Outside wire harness (A61643)
■ Programmed PROM (B62099).
You would add the following parts:
■ 34HV outside escutcheon with key (C60447)
■ Keypad assembly with cable and connector (C60325)
■ Outside wire harness (B60305)
■ Programmed PROM for keypad (B62076)
■ Reader gasket (B60321)
■ Retaining ring (A60318)
■ Sealing lens cover (A60317)
■ Reader mounting screws (A60348)
■ Adhesive tape for sounder (A60324)
■ Keypad reader electronics assembly (C60303)
■ Escutcheon gasket (A60316).
Proximity
Part type Part No. Description Mag.
a
Kpd.
b
HID
c
Mot.
d
Outside escutcheon C61420 34HV outside escutcheon with key !
C60447 34HV outside escutcheon with key ! ! !
C61405 34HV outside escutcheon without key !
C60448 34HV outside escutcheon without key ! ! !
C61400 35HV outside escutcheon with key !
C60445 35HV outside escutcheon with key ! ! !
C61402 35HV outside escutcheon without key !
C60446 35HV outside escutcheon without key ! ! !
Reader B61646 Card reader !
C60325 Keypad assembly with cable and connector !
C60342 HID proximity bezel with antennae &
IR assembly
!
C60337 Motorola proximity bezel with reader assembly !
Outside wire harness A61643 Outside wire harness !
B60305 Outside wire harness !! !