Service manual

Security Device Maintenance
V Series Service Manual 2–31
34HV/35HV KNOB/LEVER CONVERSION
If you want to convert an existing 34HV Lock (with knob) to a
35HV Lock (with lever), or vice-versa, use the following table to
determine the parts that you need. This table includes only the parts
that are different.
For example, to convert a 34HV Lock with turn knob, key, and
magnetic strip card reader to a 35HV Lock with lever (with turn knob,
key, and magnetic stripe card reader, you would remove the following
parts:
■ Old knob
■ 34HV outside escutcheon with key (C61420)
■ 34HV inside escutcheon with turn knob (C61421)
■ Latchbolt for knob (B35018).
You would add the following parts:
■ New lever
■ 35HV outside escutcheon with key (C61400)
■ 35HV inside escutcheon with turn knob (C61401)
■ Latchbolt for lever (B35019)
■ Lower auxiliary spring (A34065)
■ Upper auxiliary spring (A34066)
■ Auxiliary return lever (B34020) (2 needed).
Part Type Part No. Description Knob Lever
Trim Parts
a
Outside escutcheon C61420 34HV outside escutcheon with key (magnetic stripe) !
C60447 34HV outside escutcheon with key (keypad/proximity) !
C61405 34HV outside escutcheon without key (magnetic stripe) !
C60448 34HV outside escutcheon without key (keypad/proximity) !
C61400 35HV outside escutcheon with key (magnetic stripe) !
C60445 35HV outside escutcheon with key (keypad/proximity) !
C61402 35HV outside escutcheon without key (magnetic stripe) !
C60446 35HV outside escutcheon without key (keypad/proximity) !
Inside escutcheon C61421 34HV inside escutcheon with turn knob !
C61406 34HV inside escutcheon without turn knob !
C61401 35HV inside escutcheon with turn knob !
C61409 35HV inside escutcheon without turn knob !
Case parts
Latchbolt B35018 Latchbolt (knob) !
B35019 Latchbolt (lever) !
Lower auxiliary spring A34065 Lower auxiliary spring !
Upper auxiliary spring A34066 Upper auxiliary spring !
Auxiliary return lever B34020 Auxiliary return lever (2 needed) !
a. Refer to the H Series Service Manual for additional trim parts.