Instruction manual

3
Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax [phone] | keyless.com
 Output Capabilities
The KE-265 provides two SPDT dry contact relays (rated at 6
amps at 120 VAC). Each relay can be congured to perform one of
many different functions depending on the specic access control
requirement. User Authorization to control each relay is determined
by Setting Relay Options (see System Hardware Setup on page 11).
Each relay can be congured for one of the following options:
1. Voltage Output – For any Fail Safe or Fail Secure Locking Device
2. Dry Contact Output – For control of Gate Operator or Garage
Door.
3. CCTV or Light Controller – First key press triggers a 10 second
output.
4. Doorbell – Press * at the Keypad to trigger a 1 second output for
a doorbell (not included). This function is only available with a 12
Pad 3x4 or Thinline 2x6.
5. Auxiliary Output – Momentary or Manual Control of an electronic
device.