Instruction manual

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax [phone] | keyless.com
14
!!
!!
! Using Keypad Programmer Software
Program Code
Click “Set Up” and select
appropriate options and
COM Port. Click “OK.” Enter
the Keypad Master Code at
the bottom.
1. To add a code, double-click an empty line or click
and fill in the blanks.
2. To delete, highlight the code line and click .
3. To change user options / authorizations, double-click the code
line.
When finished, save the code chart file in either protected or
unprotected format and upload to the K1-ERM. If program-
ming has been done at the Keypad, you can download from
the Keypad to a blank code chart (names are not stored in the
Keypad so they will be blank) or MERGE the Keypad informa-
tion with an existing code chart. If there are conflicts (e.g., two
User Number 1’s), you will be asked to select a resolution. Once
complete, you will need to save the chart and upload to the
Keypad to make sure they both agree.