Instruction manual

17
Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax [phone] | keyless.com
Programming Individual Users
Authorized users (master code or any user authorized to program) can
program users directly from the Keypad. Each Individual User can be
assigned various authorizations. Review System Setup
before program-
ming individual users.
1. Enter * 1
2. Enter the Master Code followed by #
Example: * 1 1 2 3 #
This opens programming and causes:
3. Proceed to one of the following seven programming options:
! Adding a New User
a. Enter 1 #
b. Enter the User ID (1 to 500) followed by #
c. Enter the User Code/PIN (3-8 digits), followed by #
d. Enter the desired User Authorization Code, followed by # (Repeat
for additional authorizations or skip to Step e for no authoriza-
tions.)
Code User Authorization
1 Latching Authorization
2 Program or Delete Users Authorization
3 Output A Authorization (see notes)
4 2nd Door (see notes)
5 Output B Authorization (see notes)
6-7 Continued on next page
Red LED Green LED
Slow Flash Solid