User manual

Clock function Application
00:00 COUNT UP TIM‐
ER
If you do not set any other clock function the COUNT UP
TIMER automatically monitor how long the appliance op‐
erates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows and "12:00".
"12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set
the minutes.
The display shows and the set hour.
"00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
again
and again until the indicator for the time of
day
flashes in the display.
Setting the DURATION
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
then the hours for DURATION time.
Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes. and time setting
flash in the display. The appliance
deactivates automatically.
4. Press any button or open the oven
door to stop the acoustic signal.
5. Turn the knob for the oven functions to
the off position.
Setting the END
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the hours and
then the minutes for END time. Press
to confirm.
At the set time an acoustic signal sounds
for 2 minutes. and time setting flash in
the display. The appliance deactivates
automatically.
4. Press any button or open the oven
door to stop the acoustic signal.
5. Turn the knob for the oven functions to
the off position.
Setting the TIME DELAY
function
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
then the hours for DURATION time.
Press to confirm.
The display shows flashing .
4. Press
or to set the hours and
then the minutes for END time. Press
to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and time setting flash in the display.
The appliance deactivates.
5. Press any button or open the oven
door to stop the acoustic signal.
10