Assembly Instructions

x01

BODYA

qty

description

code

Hardware Check List

QtyComponents

Code

Parts Check List

ASSEMBLY INSTRUCTIONS

STELLA DESK

LEG FRAME (RIGHT)

- PLEASE DO NOT DISCARD ANY OF THE PACKAGING UNTIL YOU

HAVE CHECKED ALL THE PARTS AND THE PACKS OF HARDWARE.

- BEFORE YOU BEGIN TO ASSEMBLE YOUR NEW PIECE OF

FURNITURE, PLEASE CHECK TO ENSURE THAT ALL PARTS HAVE

BEEN SUPPLIED.

- FOLLOW INSTRUCTIONS CLOSELY AS DEVIATION FROM THEM

MAY VOID YOUR WARRANTY AND PRESENT A POSSIBLE SAFETY

RISK.

- IT IS RECOMMENDED THAT ASSEMBLY IS DONE ON A SOFT

SURFACE LIKE CARPET TO AVOID ANY DAMAGE.

- PERIODICALLY CHECK AND RE-TIGHTEN ANY FASTENERS. WIPE

DOWN ALL SURFACES WEEKLY WITH A CLEAN CLOTH. DO NOT

CLEAN ANY SURFACES WITH HARSH ABRASIVES OR CHEMICALS.

x01

01 Bolt x08

02 Spring washer x08

03 Flat washer x08

Haft moon washer

x06

FRONT

(HANDLE INSIDE)

05 Allen key x01

down

(REMOVE DRAWERS)

C LEG FRAME (LEFT) x01

D APRON

x01

PAGE 1
ASSEMBLY INSTRUCTIONS STELLA DESK Parts Check List Code A A BODY B LEG FRAME (RIGHT) C LEG FRAME (LEFT) D APRON B C Components Qty x01 x01 x01 x01 Hardware Check List D code - PLEASE DO NOT DISCARD ANY OF THE PACKAGING UNTIL YOU HAVE CHECKED ALL THE PARTS AND THE PACKS OF HARDWARE. - BEFORE YOU BEGIN TO ASSEMBLE YOUR NEW PIECE OF FURNITURE, PLEASE CHECK TO ENSURE THAT ALL PARTS HAVE BEEN SUPPLIED.
PAGE 2
3. BACK A 4. 05 01 02 03 D B A C 01 02 03 04 05 100% 5.
PAGE 3
FURNITURE TIPPING RESTRAINT FOR STELLA DESK TIPPING KIT CHECK LIST Young children may be injured by tipping furniture and the use of a tipping restraint is highly recommended. CODE When properly installed, this restraint could provide protection against the unexpected tipping of furniture due to small tremors, bumps or climbing. We recommend mounting this restraint to a wall stud. WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision.