User Manual

Model ESS-200-BLK Big & Tall 400 lbs. Mesh and Fabric Chair (Black)
5
Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
WEIGHT CAPACITY: 400 lbs.
07.27.2015
1
E
F
3
4
Parts Listing
2
6
G
B
C
C
D
H
I
H
B
A
I
C
C
I
Screws (5/16” x 1-1/2”)
6 Units
J
Allen Wrench
1 Unit
G
Casters
5 Units
H
Screws (5/16” x 1-1/4”)
8 Units
E
Gas Lift
1 Unit
F
Chair Base
1 Unit
C
Chair Arms
2 Units
D
Seat Mechanism
1 Unit
B
Chair Seat
1 Unit
A
Chair Back
1 Unit
STOP
Assembly Instructions
Tools Needed: Allen Wrench - Supplied
Please read all instructions before assembly.
Step 1: Insert Casters (G) into Chair Base (F). Insert Gas Lift (E) into Chair Base (F).
Step 2: Attach Seat Mechanism (D) to bottom of Chair Seat (B) using Screws (H)
and Screws (I). Slide Seat Mechanism (D) Levers in place as shown.
Step 3: Attach Chair Arms (C) to Chair Seat (B) using Screws (H). Tighten with
Allen Wrench (J).
Step 4: Attach Chair Back (A) to Chair Seat (B) using Screws (I). Tighten with
Allen Wrench (J).
Step 5: Take entire chair frame and place the hole in the center of the
Seat Mechanism (D) onto Gas Lift (E). Press down firmly to secure.
Step 6: Now your chair is fully assembled.
B
H