User Manual

Model ESS-101-BLK Armless Task Chair (Black)
5
Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
WEIGHT CAPACITY: 250 lbs.
07.27.2015
1
3
4
Parts Listing
2
Gas Lift
1 Unit
D
H
Screws (1/4” x 7/8”)
4 Units
I
Screws (5/16” x 1-1/4”)
4 Units
B
A
I
A
B
B
Chair Seat
1 Unit
A
Chair Back
1 Unit
F
Chair Base
1 Unit
G
Casters
5 Units
Seat Mechanism
1 Unit
C
E
D
F
E
Telescopic Bellows
1 Unit
G
B
C
H
C
D
STOP
Assembly Instructions
Tools Needed: Allen Wrench - Supplied
Please read all instructions before assembly.
Step 1: Insert Casters (G) into Chair Base (F). Insert Gas Lift (D) into
Chair Base (F). Cover Gas Lift (D) with Telescopic Bellows (E).
Step 2: Attach Seat Mechanism (C) to bottom of Chair Seat (B)
using Screws (H). Tighten with Allen Wrench (J).
Step 3: Attach Chair Back (A) to Chair Seat (B) using Screws (I).
Tighten with Allen Wrench (J).
Step 4: Take entire chair frame and place the hole in the center
of the Seat Mechanism (C) onto Gas Lift (D).
Press down firmly on Chair Seat (B) to secure.
Step 5: Now your chair is fully assembled.
J
Allen Wrench
1 Unit