Installation guide

Step 1: USB Pen
Insert the USB Pen Drive into a spare USB socket on a PC running MS Windows XP/Vista.
Depending on your computer's configuration Windows may prompt you to take an Autoplay action:
• If asked select to view the files on the pen drive.
• If not asked open ‘My Computer’ from the Start Menu and navigate to the pen drive.
The Encoder configuration utility is located on the pen drive - double-click
‘ConfigureEncoder2.0.exe’ to run it. The Configure Encoder wizard will open.
Step 2: Encoder Model Selected
Step 3: Connection Method
Select the ‘C300 Encoder’ option and then click
‘Next’.
Select the connection method that is relevant to
your purpose: