Installation guide

Installation Guide
Thank you for purchasing your new TVI C300 Encoder.
The package you have received contains everything you need to set up an infrastructure to support
the Encoder, and allow you to view video streams, subject to having a camera and suitable
communications infrastructure.
This Encoder works in combination with a TVI Server to deliver video to end users and will not
operate without access to one. You will need to use TVI Manager to create an account on the
Server.
• This installation guide provides instructions for installing the TVI Encoder and connecting it to an
existing TVI Infrastructure.
• For guidance on how to setup a TVI Server please refer to the product documentation on the
Product CD that accompanies this unit or online via http://support.essential-viewing.com/support.
Installation Steps
1. Check the package contents listed in the Package Contents section
2. Install the Network Encoder
3. Configure the Network Encoder
Package Contents
• TVI C300 Encoder • Terminal Block
• Power Adapter • USB Pen Drive
• 3G Antenna • Installation Guide (this manual)
• Product CD containing software and documentation
Hardware Overview
Figure 1: Front Panel
Figure 2: Rear Panel
Video In
Audio In/ Out
DVR / PTZ
R S2 32 Port
Antenna
I/O Terminal Power In
Network USB 3G/GPRS SIM Slot LED Status Lights