Hardware manual

TVI I300 Hardware Manual © Essential Viewing Systems Limited 2010
Page 15
5.2 Factory Reset
It is possible to remove the configuration settings of an I300 and restore the unit back to the
‘original factory defaults’. This operation does not remove any OEM Defaults that have been
applied and so the I300 will retain any OEM Default settings applied. This operation is designed
to be used by an end-user who wishes to reset their I300.
A factory reset is achieved by creating a single file in the root of the pen drive with the name;
.FACTORY_RESET
The file can be zero length as the I300 performs the reset based on the presence of the file
rather than the file contents.
5.3 Complete Configuration Erase
The I300 supports a complete erase of all configuration settings including the OEM defaults to
return the I300 to a blank state which may be required for manufacture testing. This is
achieved by creating a single file in the root of the pen drive with the name;
.ERASE_CONFIG
The file can be zero length as the I300 performs the configuration erase based on the presence
of the file rather than the file contents.