Owners manual

B345933080K00
page 15
11
stud
montante
planche
wallboard
muro
mur
hole
agujero
trou
x
12 1
12c
12d
Option 1:
Securely screw (12c) into solid area of the wall as shown.
Opción 1:
Atornille firmemente el tornillo (12c) en el área sólida de la pared como mostrado.
Option 1:
Vissez solidement la vis (12c) dans une région solide du mur comme montré.
Option 2:
Drill a 3/16" diameter hole (5mm) in the wallboard. Tap the wall anchor (14d) into the hole until
it is flush. Fasten the wall bracket (14a) to the wall anchor (14d) with the screw (14c).
Opcion 2:
Taladre un agujero de 3/16" de diámetro (5mm) en la pared. Golpea la ancla de pared (12d)
en el agujero hasta que sea parejo. Abroche la escuadra de pared (12a) al la ancla de la pa
red (12d) con el tornillo (12c).
Option 2:
Percez un trou de 3/16" de diamètre (5 mm) dans le mur. Enfoncez l'ancrage mural (12d) d
ans le trou jusqu'à ce qu'il soit à égalité avec le mur. Fixez le support mural (12a) à l'ancrage mu
ral (12d) avec la vis (12c).
12c
12d