User guide

Installation of the WeR@Home™ System
System User Guide
91
3.6.2.4 Dismounting the Camera
Figure 61: Dismounting the Camera
3.6.3 Adding the Camera to the WeR@Home
™
System
The Camera need to be functionally added to the system following the above described physical installation
procedure. The addition of the Camera is a standard Add Device procedure performed as follows:
Note: You may also want to refer to paragraph 5.1 below to get acquainted with the
process of installing/ replacing a battery in the Camera.
1. Prepare the three (3) AA-size Alkaline batteries required to power the Camera.