User`s manual

9/28/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. D
ICMP Not Echo: Setup the ICMP echo Enable/Disable. This function can disable echo when someone
pings this device, it can avoid hacker try to attack the device.
Send Anonymous CID: click Yes for not sending the phones caller ID out.
Send Flash Event: click DTMF EVENT or SIP INFO for the flash event.
PPPoE Retry Period: Type the time in second for PPPoE to redial, if connection is failed.
System Log Server: Type a server’s IP address for saving system log.
System Log Type: Select types of log for saving. The phone offers different debugging levels, each
levels contains different sets of debugging messages to send.
When you have finished the settings, click Submit. Go to the Save Changes page and click Save to
reflect the changes.
3.9 System Auth
In System Authority, you can change your login name and password.
3.10 Save Changes
In Save Changes, you can save the changes you have done. If you want to use new setting in the VoIP
Phone, You have to click Save. After you click Save, the VoIP Phone will automatically restart and the
new settings will take effect.
32