User`s manual

9/28/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. D

3.6.6 RPort Function

You can setup the RPort Enable/Disable in this page. To change this setting, please follow your ISP

information. When you have finished the settings, click Submit. Go to the Save Changes page and

click Save to reflect the changes.

3.6.7 Other Settings

You can setup the Hold by RFC, Voice/SIP QoS and SIP Expire Time in this page. To change these

settings please follow your ISP information. The QoS setting is to set the voice packets’ priority. If you

set the value higher than 0, then the voice packets will get the higher priority to the Internet. Note that

the QoS function still needs to cooperate with the others Internet devices.

When you have finished the settings, click Submit. Go to the Save Changes page and click Save to

reflect the changes.