User`s manual

9/28/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. D
First you need click On in Active to enable the Service Domain, and you can input the following items:
Display Name: You can input the name you want to display.
User Name: You need to input the User Name get from your ISP.
Register Name: You need to input the Register Name get from your ISP.
Note: Usually User Name and Register Name are the same unless specified by ISP.
Register Password: You need to input the Register Password get from your ISP.
Domain Server: You need to input the Domain Server get from your ISP.
Note: The default SIP port of the Domain Server is 5060. If you want to change the SIP port, specify
the port here.
26