User`s manual

9/28/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. D
When you enable the first VLAN Packets and set the VID, User Priority, and CFI, all the incoming
packets with the VoIP Phone’s IP address and the same VID will be accept by the VoIP Phone. If the
incoming packets with the VoIP Phone’s IP address but the different VID then the packets will be
discard by the VoIP Phone. The Other incoming packets with different IP address will go through the
LAN port to the PC.
When you have finished the settings, click Submit. Go to the Save Changes page and click Save to
reflect the changes.
3.5.6 DMZ Setting
You can enable DMZ Setting of the VoIP Phone. Click On, and type an IP address of the PC in DMZ
Host IP.
When you have finished the settings, click Submit. Go to the Save Changes page and click Save to
reflect the changes.
3.5.7 Virtual Server
EIP 7012 provides configuring as a virtual server function.
23