User`s manual

9/28/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. D

The LAN settings’ default does not effect as Bridge mode is enabled. To configure LAN settings, go to

Network -> WAN Settings, and click NAT under LAN Mode.

You can connect your PC to the LAN port, set your PC as DHCP Client mode, and then you can get IP

address from the VoIP Phone.

When you have finished the settings, click Submit. Go to the Save Changes page and click Save to

reflect the changes.

3.5.4 DDNS Settings

You can configure the DDNS setting in this page. You need to have the DDNS account and input the

information properly. You can have a DDNS account with a public IP address then others can call you

via the DDNS account. But now most of the VoIP applications are work with a SIP Proxy Server. When

you have finished the settings, click Submit. Go to the Save Changes page and click Save to reflect

the changes.