User`s manual

9/28/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. D

CFI 0~1

Status Show WAN, LAN IP address and MAC address.

2.3.5 SIP Setting

If you want to use keypad to set the SIP setting, you have to go to item 8 Sys. Authority to input the

password, or you can not change the SIP setting.

Name Description

Service Domain First/Second/Third

Realm

The realms include following information. You can press

“1*#”, “2*#”, and ”3*#” to change among these three SIP

realms.

Activation: To enable or disable the realm.

User Name: The SIP’s user name.

Display Name: The SIP’s display name.

Proxy Server: The address of SIP proxy.

Domain Server: The address of domain server.

Outbound Proxy: The address of outbound proxy.

Codec Type The codec type includes G.711 uLaw, G.711 aLaw,

G.723, G.729, G.726-16, G.726-24, G.726-32, and

G.726-40.

Codec

VAD Voice Active Detection Enable/Disable.

Outband DTMF Enable/Disable outband DTMF. RTP Setting

Duplicate RTP

No Duplicate: Do not resend the voice packages.

One Duplicate: Resend voice packages one time.

Two Duplicate: Resend voice packages two times.

RPort Setting RPort Enabled/Disabled

Hold by RFC Enable/Disable Holding the calls, according to RFC3261.

Status Show the SIP Proxy register status. You can use UP/Down key to check each

Realm’s status.