System information

2/14/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. B
23
User Name: you need to input the User Name get from your ISP.
Register Name: you need to input the Register Name get from your ISP.
Register Password: you need to input the Register Password get from your ISP.
Domain Server: you need to input the Domain Server get from your ISP.
Note: The default SIP port of the Domain Server is 5060. If you want to change the SIP port, specify the port
here.
Example: 192.168.1.100 (Assume Domain server SIP port = 5060)
192.168.1.100:5678 (change the SIP port to 5678)
Proxy Server: you need to input the Proxy Server get from your ISP.
Outbound Proxy: you need to input the Outbound Proxy get from your ISP. If your ISP does not provide the
information, then you can skip this item.
Subscribe for MWI: you can click ON for the IP phone to ask for MWI periodically.
You can see the Register Status in the Status item. If the item shows “Registered”, then your VoIP Phone is
registered to the ISP, you can make a phone call directly.
If you have more than one SIP account, you can follow the steps to register to the other ISP.
When you finished the settings, click Submit. Go to the Save changes page and click Save to reflect the
changes.
3.6.2 Port Settings
You can setup the SIP and RTP port number in this page. Each ISP provider will have different SIP/RTP port
setting, please refer to the ISP to setup the port number correctly. When you finished the settings, click Submit.
Go to the Save changes page and click Save to reflect the changes.
3.6.3 Codec Settings
You can setup the Codec priority, RTP packet length, and VAD function in this page. You need to follow the ISP
suggestion to setup these items. When you finished the settings, click Submit. Go to the Save changes page
and click Save to reflect the changes.