System information

2/14/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. B
21
3.5.7 Virtual Server
EIP 7012 provides configuring as a virtual server function.
If you need to add a virtual server into the Virtual Server list, you need to enter the num, server IP,
internal/external port, and select a protocol. When you finished a new phone list, just click Add Server.
If you want to enable a virtual server, you can select the virtual server you want to enable, and then click Enable
Selected.
If you want to delete a virtual server, you can select the virtual server you want to delete, and then click Delete
Selected.
If you want to delete all virtual servers, you can click Delete All.
When you finished the settings, click Submit. Go to the Save changes page and click Save to reflect the
changes.
3.6 SIP Settings
In SIP Settings, you can setup the Service Domain, Port Settings, Codec Settings, Codec ID Settings, RTP
Setting, RPort Setting and Other Settings. If the VoIP service is provided by ISP, you need to setup the related