System information

2/14/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. B
19
The LAN settings’ default does not effect as Bridge mode is enabled. To configure LAN settings, go to Network
-> WAN Settings, and click NAT under LAN Mode.
You can connect your PC to the LAN port, set your PC as DHCP Client mode, and then you can get IP address
from the TA.
When you finished the settings, click Submit. Go to the Save changes page and click Save to reflect the
changes.
3.5.4 DDNS Settings
You can configure the DDNS setting in this page. You need to have the DDNS account and input the information
properly. You can have a DDNS account with a public IP address then others can call you via the DDNS account.
But now most of the VoIP applications are work with a SIP Proxy Server. When you finished the settings, click
Submit. Go to the Save changes page and click Save to reflect the changes.
3.5.5 VLAN Settings
You can set the VLAN setting to set the packets related to the TA.