System information

2/14/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. B
16
be dropped “55”, and add “002” to call
out.
Auto Dial Time: The default is 5 seconds. Enter a time in sec for auto dial after the time is up.
When you finished the setting, click Submit. Go to the Save changes page and click Save to reflect the changes.
3.4.7 Call Waiting Settings
If the user doesn’t want to be informed there is a new incoming call, user can set the function off. When you
finished the settings, click Submit. Go to the Save changes page and click Save to reflect the changes.
3.4.8 Soft-key Settings
EIP 7012 supports soft-key settings for voice messages. You can press SPEAKER, and then VOICE MSG on the
IP phone to dial out the entered number in order to get into the voice mail service.
Voice Mail Key: enter a serial of number for listening to the voice messages.
When you finished the setting, click Submit. Go to the Save changes page and click Save to reflect the changes.
3.4.9 Hot Line Settings
Hot line setting is a special line for the IP Phone. When enable the function, the phone will directly dial out the
number once the phone is picked up.