System information

2/14/2007 VoIP Phone Administration Guide MAG-07005-2 Rev. B
8
STUN Enable/Disable STUN.
STUN Setting
STUN Server The address of STUN server.
2.3.7 Administrator
If you want to use keypad to set the Administrator setting, you have to go to item 8 Sys. Authority to input the
password, or you can not change the Administrator setting.
Name Description
This function must be work with IP PBX.
Upgrade Now Select to direct connect to IP PBX to check if there is any
upgrade version. If there is a newer version, IP phone will
upgrade the system automatically.
Upgrade system
Schedule State Select to see the current status and scheduling time.
Set to Default You can restore to the default setting.
Change Pwd. Press ENTER and press a new password to replace the original password with the new
one.
Version This will show the system’s firmware version.
Vendor ID To see the vendor ID of the IP Phone
Watch Dog You can use this to enable Watch Dog function to do the debugging.
Restart You can use this function to restart your IP Phone.
2.3.8 Sys. Authority
To do the SIP setting, NAT traversal and Administrator from Keypad, you need to input the password first. Default
is “test”.