User's Guide

SETTING UP THE MDSENSE
Care@Home™ MDsense User Guide
11
14. Test detection:
a. Walk in front of the MDsense. The LED flashes.
b. Lie on the floor. Remain still while the LED is solid red. Remain on the floor until the LED flashes
slowly. The control panel announces, “Test successful”.
c. Press the control panel’s RESET button. The control panel announces, “control panel exited
test mode”.
NOTE: After testing is completed during installation, you do not need to test the
MDsense again. Ongoing automatic self-tests ensure proper functioning of the
MDsense.
2.3. Configuring the MDsense
You can configure parameters for the MDsense using Care@Home
™
CMS. For example, you can define
how and when the MDsense issues notifications to the control panel. Refer to the Care@Home
™
CMS
reference documentation.