User's Guide
Table Of Contents
- 1. Overview
- 2. Installing the C7000
- 3. Operating the C7000
- 4. Restoring Factory Settings
- 5. Removing All Peripherals
- 6. Maintaining the C7000
- 7. Specifications
- Appendix A Testing Peripherals
INSTALLING THE C7000
8
Care@Home™ C7000 User Guide
8. For Ethernet models, plug the 90° Ethernet connector into the C7000’s Ethernet port and
secure the cable under the tab. Plug the other end of the Ethernet cable into an Ethernet port.
9. Replace the back cover.
10. For the PSTN model, connect the C7000 to the landline.
a. Connect the phone cable between the LINE IN socket and the home phone jack. The
telephone cable used should be at least of 26 AWG.
b. Optionally, you can connect a telephone to the TO PHONE socket, using the cable
included in the Care@Home™ PERS kit.
11. Turn on the power switch.
The Power LED lights green.
The Communication LED lights red.
Tab
Ethernet
Port