User's Guide
Table Of Contents
- 1. Overview
- 2. Installing the C7000
- 3. Operating the C7000
- 4. Restoring Factory Settings
- 5. Removing All Peripherals
- 6. Maintaining the C7000
- 7. Specifications
- Appendix A Testing Peripherals
TESTING PERIPHERALS
Care@Home™ C7000 User Guide
25
c. Ensure that Disable is not selected.
d. To disable the Trouble LED, while allowing emergency device testing, clear all choices.
Testing the MDsense
To test the MDsense:
1. Press the control panel's PAIRING button twice. The control panel responds, “Control panel
entered test mode”. The control panel’s power, communication, and trouble LEDs flash.
2. Remove the MDsense’s socket cover, pull cord or power cord. The MDsense’s LED lights. The
control panel responds with a voice message.
3. Replace the socket cover, pull cord or power cable.
PAIRING
button