User's Guide

TESTING PERIPHERALS
24
Care@Home™ C7000 User Guide
To test the emergency devices:
1. Press the C7000's PAIRING button twice. The C7000 responds, “Control panel entered test mode”.
The power, communication, and trouble LEDs flash.
2. Press the pendant's button. The C7000 confirms with a voice message.
3. Test the VPD - Do one of the following:
 Press the EMERGENCY CALL button.
 Pull the emergency cord.
 Shout the trigger phrase.
The C7000 confirms with a voice message.
4. Press the SPB's SOS button. The C7000 confirms with a voice message.
5. Test the SPD - Do one of the following:
 Press the EMERGENCY CALL button.
 Pull the emergency cord.
The C7000 confirms with a voice message.
6. Press the C7000's RESET button. The C7000 responds, "Control panel exited test mode".
Troubleshooting
If the C7000 does not respond to a device being triggered:
1. Try moving the device and testing again.
2. Check CMS to ensure that the Trouble LED is not disabled:
a. Log on to CMS.
b. From the Main menu, click Voice & LED. The Voice & LED screen appears.
PAIRING button