User's Guide

SPECIFICATIONS
Care@Home™ C7000 User Guide
21
Communication Channels PSTN, cellular or Ethernet, dependent on model and software
release
Messages are normally sent and received using the primary
communication channel. In the event of a communication failure,
the C7000 automatically switches to the alternate communication
channel.
For cellular-PSTN models, cellular communication is used
whenever the SIM is registered on a cellular network. PSTN is used
only when the SIM is not registered on a cellular network.
Color White and gray
Peripheral Devices Up to 30 peripheral devices
Operating temperature 0°C - 49°C (32°F - 120°F)
Compliance CE, FCC, IC
ETL :
 UL 1637
 UL 1635
 CSA 22.2 #205
EN 60950-1
EN 301 489-1 & EN 301 489-3
EN 300 220-1 & EN 300 220-2; Receiver sensitivity: -108 dBm
EN 50130-4
EN 50130-5 Environmental Class I
EN 50134-2, EN 50134-3, and 50134-5
EN 50136-2:2013 Category C (D3,M3,T1,A1,S0,I0)
Operation Mode-Pass-Through
PSTN model: ANSI/TIA-968-B - Terminal equipment standard
Cellular model: AT&T and PTCRB compliance
EN910-EUR – Compliant with Global Connection (GCF)
requirements, as well as the Global System for mobile
communications standard EN 301 511.
This device complies with FCC Rules Part 15 and with Industry Canada’s license-exempt RSSs. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) this device must accept any interference received including interference that may cause undesired
operation.
For Industry Canada:
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;