User's Guide
Table Of Contents
- 1. Overview
- 2. Installing the C7000
- 3. Operating the C7000
- 4. Restoring Factory Settings
- 5. Removing All Peripherals
- 6. Maintaining the C7000
- 7. Specifications
- Appendix A Testing Peripherals
REMOVING ALL PERIPHERALS
Care@Home™ C7000 User Guide
17
5. Removing All Peripherals
The monitoring station continues to receive updates about lost peripherals until they are removed
from the C7000.
NOTE: This action removes all peripherals from the C7000. You need to pair all
the peripherals with the C7000 again.
To remove all the peripherals from the C7000:
1. Press the PAIRING button, and hold for five seconds.
2. Press the RESET button, and hold for five seconds. A voice message from the C7000 instructs
you to press the PAIRING button to remove all peripherals.
3. Press the PAIRING button. A voice message from the C7000 confirms that all devices were
removed from the C7000.