User's Guide

Operating the MDsense
12
Care@Home™ MDsense User Guide
3. Operating the MDsense
The MDsense sends status and event messages to the control panel.
3.1. Notifications
The MDsense sends notifications to the control panel when:
 The MDsense detects a fall
 The MDsense is removed from its position on the wall or returned to its position
 The MDsense’s batteries are low or empty
 The optional pull cord is removed or replaced
NOTE: Some types of notifications are sent immediately, while others may take a
few minutes.
3.2. Supervision
The MDsense is a supervised device. The MDsense periodically transmits its status to the control panel.
If after a pre-defined time the control panel does not receive the status message, the control panel
sends a supervision lost message to the monitoring station.