User's Guide

Setting Up the MDsense
Care@Home™ MDsense User Guide 11
12. Slide the MDsense into the corner. The tape sticks to the wall.
13. Peel off the strip and press the MDsense against the wall.
14. Test detection:
a. Walk in front of the MDsense. The LED flashes.
b. Lie on the floor. Remain still while the LED is solid red. Remain on the floor until the LED flashes
slowly.
c. Press the control panel’s RESET button. The control panel exits test mode.
2.3. Configuring the MDsense
You can configure parameters for the MDsense using Care@Home
™
CMS. For example, you can define
how and when the MDsense issues notifications to the control panel. Refer to the Care@Home
™
CMS
reference documentation.