User's Guide

Pairing the Pendant
4
Care@Home™ Halo Emergency Pendant Plus User Guide
2. Pairing the Pendant
You need to pair the pendant with the control panel before the pendant can be used.
To pair a pendant:
1. Press and hold the PAIRING button on the control panel until you hear the double beep.
2. Press and hold pendant button for five seconds.
3. Ensure that the pairing process is successful. The process can have the following results:
Control Panel Behavior Meaning
EMERGENCY button ring blinks blue.
Pairing is successful
Control panel beeps and EMERGENCY button ring
lights up red for two seconds.
Pairing is unsuccessful. Try again.
Control panel makes a low pitch beep and
EMERGENCY button ring lights up blue as
EMERGENCY button lights up red.
This pendant has already been paired with this
control panel.
Control panel beeps and the EMERGENCY button
ring lights up red
Control panel memory is full. No additional devices
can be paired.
PAIRING Button