Manualshelf

User Guide Part 7

ManualsBrandsEssence Security International ManualsElectronicsUniversal transmitter
12345678910
Installation of the We.R™ System
178
10. The down-counter provides a time-frame of three (3) minutes within which the battery
should be installed to power-up the Universal Transmitter, as demonstrated in Figure 146
below:
Figure 146: Inserting a Battery into the Universal Transmitter
11. Verify battery polarity to match marking within the unit body.
Note: In case the installation of the batteries could not be accomplished
within the three (3) minutes period, it is possible to restart the process by
applying step 2 (on page 176) and onwards again.
12. The insertion of the battery into the Universal Transmitter triggers a handshake process in
which the Universal Transmitter communicates with the CCU to inform it of its presence
and the CCU add it to its peripherals’ inventory.
13. If the CCU did not detect the new Universal Transmitter within this time-frame, the following
error ( ) message will appear within the Add New Device window: