User Guide Part 7

Installation of the We.R™ System
176
We.R
™
System User Guide
2. Activate the We.R
™
Web Application.
Figure 143: Add Universal Transmitter Device Utilizing Web Application
3. Select the Devices page (tab) and click over the button.
4. A roll-down selection menu will open.
5. Click over the _Add Universal Transmitter_ option of the menu as illustrated in Figure 143
above.
6. A window defining the function performed by the legacy wired device opens (see Figure
144 below) where you need to:
 Select the device type.
 Define its mode of operation (normally closed or normally open).
 Optionally mark a request for notification regarding device reset.