User Guide Part 7

Installation of the We.R™ System
We.R
™
System User Guide
175
1. Insert a coin (or flat screw driver) into one of the edge slots as demonstrated in Figure 142
below.
2. Twist it to raise the cover (body) edge.
3. Pull the body strait out of the base’s shoulders.
Figure 142: Dismounting the Universal Transmitter
3.13.3. Adding the Universal Transmitter to the We.R
™
System
The Universal Transmitter need to be functionally added to the system following the above
described physical installation procedure.
The addition of the Universal Transmitter is a standard Add Device procedure performed as
follows:
Note: You may also want to refer to paragraph 5.1 below to get acquainted
with the process of installing/ replacing a battery in the Flood Detector.
1. Prepare a single AA-size Alkaline battery required to power the Universal Transmitter.